The back story

On your search for the best scan quality you will run across Doug Fisher over at Better Scanning. He makes a variable height mounting system that addresses focus plane issues found in flatbed scanners. While you visit his site encouraging yourself to buy his product you will also find his DIY wet mounting on the cheap page, where apparently for $60 you can be up and running.

Along the way it is impossible to overlook Julio Fernandez at ScanScience. At the core of his product line is Lumina scanning fluid, around which various kits are assembled to help get the best from your scanner. He sells a variety of other cleaners and equipment to deliver a one stop shop experience. You quickly find that $60 is not what you are spending. Nothing Julio is selling inhibits also buying Doug Fisher’s variable mounting system, likely the ultimate setup for flatbeds.

My primary scanner for medium-format and smaller is the Nikon Coolscan 9000. It is a fantastic machine offering among other things, a variable focus lens which means even if there was such a thing as Doug Fisher’s variable height mounting system, it would be a waste on a Nikon Coolscan 9000. As part of your scan, the Nikon Coolscan 9000 will either auto-focus or allow you to select the focus point. This is the scanner I was using almost exclusively at the end of 2009 and my wet scanning adventure led me to try ScanScience.

Earlier in the year I picked up an Epson Perfection V750-M Pro to scan my large format photography. This is where I would be excited to try the Better Scanning system. As you will see, it is clearly superior to the variable focus solution from ScanScience.

Opening the box

I live in Brooklyn, New York USA. ScanScience ships from Orangeville, Ontario Canada. Having purchased twice I know for certain it takes longer than all the estimates suggest. Likely the shipment sits in customs and with all the heightened security gets delayed on its ground journey. So, by the time you get your ScanScience kit you are delighted because you forgot when it was supposed to arrive.

Opening the box the first time informs you of three key things.

• First, all the items scream exactness. The thin scientific glass, precut overlays and the careful packaging all speak to the time dedicated to sourcing and assembling the kit.
• Second, some of the products you purchased you could have found elsewhere, possibly for cheaper, for example, the lint-free gloves or the squeegee. For that matter, you could probably buy all of it if you knew what you were looking for.
• Third, the Lumina fluid is the star of the show – standing out as the one product you won’t buy somewhere else. Second place goes to the ultra-thin beveled-edge scientific glass.

Everything is perfectly assembled and while obviously hand crafted is appreciated and valued.

A ScanScience kit for 35mm and medium-format film. I ordered two bottles of Lumina and an extra glass plate for each format.

My second order to supply the Epson Perfection V750-M Pro was a similar experience. The biggest difference in the kit was the solution to the variable height mounting solution which is a set of “shims” to raise or lower the film plane. I actually own a micrometer so finding and assembling the various shims wouldn’t have been too challenging, but it would take time and that I have little of. What is more, I have trouble seeing a remarkable difference between many of the adjustments in height. I have used the default Epson dry adapter, Epson’s wet scanning tray and ScanScience shims and while I have settled on a height, it was a challenging activity worthy of its own post.

A ScanSCience kit for 4x5 large format with the optional film cleaner and power pump.

Thoughts

In practice it takes some time to get the proper technique in assembling clean and bubble free wet mounts. That said this is probably true for most setups.

While there is no obvious deception, initially you have the feeling like you overpaid for the “kit”. I mean the kit comes with Bounty sheets. It says so. So, what is the surprise when you get a wad of towel paper? Similarly, the microfiber cloth, what did you expect? At the end of the day, you are paying for shopping services, because while you could have purchased these things on your own, it takes time to conceive and assemble a kit. If you do not know what you are looking for, ScanScience delivers the single point of purchase experience. Technically anyone could source the components, but why? You pay with time or money, so get over the fact that you could have done it on your own and focus on the fact that you didn’t have to. More importantly, the items that matter are really of excellent quality – clearly demonstrating someone who knows more than you did their job.

I haven’t used other wet mounting fluids but Lumina seems to do the trick. If you buy into the safety claims, Lumina is a better substance to be working with. It goes on wet like an oil and stays with you throughout the scan. When you disassemble the mount it will evaporate. You film usually dries unaffected and while this could be true for the glass and overlays, I clean everything between mounts.

If you are using a Nikon Coolscan 9000 you will have to modify your film holder. ScanScience does not offer instructions on how to do it, so it is DIY activity. You can see how I did it in a previous post.

As you start working through your technique you will find that dust is everywhere. You need compressed air or an anti-static brush or both. I use the tried and true Staticmaster brush and Pec-Pad wipes.

You need a clean and flat work area. I use a quarter-inch glass plate, but look forward to using a nicer larger light box. Consider what you have as the distance between a perfect mount and your scanner is filled with dust.

ScanScience offers a solid service and high-quality products. The kits and digital manual get you up and running quickly. Julio is quick to offer help and support as you work through your purchasing decisions and mounting technique. Remarkable results are possible.

If you are the kind of person that happily assembles the DIY kit for projects then get only the items you don’t think you can easily source on your own. If you are happy to pay for this kind of service, know that you will. The resulting quality of my wet mount scans is worth every penny. I would definitely buy from ScanScience again.

If I missed something in this review or simply didn’t answer your burning question, ask! There was nothing worse than searching and not finding an answer. I’ll tell you what I know and share my experiences.

Due to some shipping concerns many of the chemicals you might want to explore will require you to leave the house and explore your local photography store. There are plenty of places where “local” is hours away if it exists at all. If you enjoy ordering online out of convenience or necessity the following shopping list for black and white film development is online ordering friendly. All of these items are generally in stock at B&H Photo and Video. The shopping list below  is what I used to get myself set up having been out of wet darkroom for years. While this list is close to the minimum requirements, it values quality components over lowest budget.

Stock photograph of development tank and 35mm film

Creating a black and white film processing kit for 35mm and 120/220

This list is shared as a wish list over at B&H Photo and Video. That will get you the shopping list without reading all of my thoughts on each item.

Paterson Changing Bag 27” x 30” – This is where you will load the film into the processing tank. Make it stress free by getting a bigger bag. They all store folded up so going cheap here simply makes you stress out when the film or reel is uncooperative.

Paterson Triple Darkroom Timer – You will need to keep track of time and this three alarm timer makes the process flow. It allows you to set up to three steps of your film developing recipe making transition between key steps simple.

Paterson Universal Tank with Reel (Super System 4) – This version requires ~600ml of fluids to cover two roles of 35mm or one roll of 120/220. An alternative would be metal reels, but if you work with medium format film, the cool factor of metal is outweighed by not crimping your film during loading.

Paterson Auto Load Adjustable Reel for Super System 4 Tanks – If you work with 35mm film you will need an additional reel to take advantage of the capacity of the base tank.

Jobo Plastic Graduate 34oz – This is a little large but I like having extra space at the top of mixing containers. The only thing this will not measure accurately will be mixing wetting agent. It can be done, but you might want to get a smaller 25-50ml graduate if you like to be absolute.

Jobo 600ml Storage Bottle Kit (3 white, 1 black) – I tend to process one tank at a time and these bottles keep the exact amount of chemical required for the tank. They are small so you do not need lots of space to work.

Yankee Filter Funnel 16oz with Fine Mesh Stainless Steel Filter – I got this mostly because there never a time where I want dust flowing into the tanks or bottles. Particles like that can attach themselves to your equipment leading to unexpected results.

Paterson Chemical Stirrer – You need something to stir the chemicals and they are all over priced.

Dot Line 2” DLC Stainless Dial Thermometer – While temperature is less critical in black and white, you still need to know the temperature of your chemicals since that is what takes all those generic instructions and plots it on a graph to set your development times. Without one of these if you wanted to maintain a certain temperature it would all be a big guess. This thermometer is short, but perfect for this size of bottle.

Chemicals – Out of convenience I prefer buying chemicals in liquid form. Unless the developer does not come that way, it ensures some level of consistency. I also subscribe to one use mixing. Stop bath and wetting agent can be reused without having significant impact on the final negative. Ilford stop bath will change colors as it exhausts.

• Ilford Ilfotec DD-X Developer
• Ilford Rapid Fixer
• Ilford Ilfostop Stop Bath for B&W
• Ilford Ilfotol Wetting Agent

Delta White Darkroom Cotton Gloves, 4 pair – These are perfect for keeping the oils and perspiration of your hands off of your film. They are inexpensive enough that throwing them out whenever you want won’t hurt your bank account.

Delta Stainless Steel Film Clips, 10 pack – These are pretty good because they require a small footprint to hold your negatives. They have enough weight and have hook letting you add weight or attach it to a string or wire to air dry.

Paterson Film Squeegee – This is one of those things that I use to have, but never loved. It can leave streaks, but it is an effective method for speeding up the drying process.

I am a believer of sticking within brands in an attempt to reduce compatibility issues. Brands of chemicals can be mixed. For example, Ilford DD-X is similar to Kodak’s TMAX developer. Getting started I think establishing a baseline is more important than using a favorite developer or trying something “new”. The minute you develop your first roll, you will see that developing black and white has many points of variability. This shopping list doesn’t include the kitchen sink, which is also required. Some people like distilled water based on bad experiences with dirty film. Create your setup and start processing black and white film to have more influence on your final image.

The Scan Science kit includes a lengthy document explaining wet scanning, technique and workflow for exceptional scans. One missing element, likely due to liability, is how to modify the Nikon film holders that come with the Nikon Coolscan 9000. That said, if the information I share here adversely affects your film holders, scanner or you in any way – physically, mentally, monetarily etc., you are on your own. I won’t be held responsible for any damages as your actions are yours.

It is also possible that modifying the Nikon film holders was seen as an obvious task, one that required no further education. Either way, this was my first experience with Scan Science and wet scanning and did not want to break my film holder to find out later that it wasn’t for me. The goal was to modify the Nikon film holder to work with the Scan Science system without breaking it.

The diagram below is a sketch I made to illustrate the method and order for removing the film holder covers from the Nikon FH-8695 120/220 Strip Film Holder. Clicking it will show you a large version for easy reading. I expect all the other holders can be modified using the same approach.

Diagram on how to modify the Nikon FH-8695 120/220 Strip Film Holder to work with Scan Science

First, work in a well lit area. These tabs are small and trying to not break plastic can be stressful enough. Don’t strain your eyes working in the dark.

Second, find an eye-glasses or hobby flat-head screw driver. I used the eye-glasses variety, but anything similar should work.

The film holder covers are held to the holder through pairs of plastic tabs. These tabs are circular and fit into the holder allowing the covers to pivot open and closed. Refer to the exploded view of tabs A and B to help visualize the following steps.

Begin by gently pressing the first cover to the left (adding stress on B and D).

Using the small flathead screw driver press firmly and gently on the outer edge of A. Pull the cover away from the holder so that tab A stays out.

Then move on to B. If tab A is sufficiently out you can apply pressure to the right to help ease tab B out. When I did my first pair, this was not the case. Pulling the cover toward me and away from the holder seemed to do the trick.

Once A and B are out, do the same on C. Once C comes loose, D should pop out or be trivial to remove.

Once you know how much force it takes to move the tabs without breaking them, the process is relatively easy. The biggest challenge is having the confidence that removing the covers can be done without harming them or the holder. Hopefully this helps others intimidated by the task.

My initial test compares the results of a dry and wet scan of the same negative. The image was captured with a Mamiya 7ii, 80mm f4 outfit. It was an extended exposure, taken at dusk. The film is 120 Kodak TMAX 400 developed at LTI New York City. The scan was performed with the same settings – 4000dpi; scale 100%; 16bit; multi-sample 1x; CCD Scan Mode set to superfine; scan image enhancer on; custom focus, black and white points. This resulted in NEF (RAW) files on disk exceeding 550MB files. Slight differences in crop are responsible for the file difference.  The wet scan fluid is Scan Science’s Lumina – a full review to come!

To keep things as simple and neutral as possible the screen shots that follow are from Nikon Scan. No processing has been performed on either, what we see is what was captured and saved. Snagit was used to capture the screens and the only modification is cropping out the main user interface of Nikon Scan. To properly view this comparison you will need to see the large versions of the following images (~2MB PNGs) by clicking the smaller versions below.

The first image shows the dry scan (left) and the wet scan (right). Each is at 8% with the scan settings area of the image view displayed to show all things that could be recorded are equal. Notice the greater tonal depth on the wet scan specifically in the shadows. Notice the crisper detail in the bricks, especially around the chimney top.

The next image zooms into the chimney at 33.33%. The details apparent at 8% are now very clear. Notice the dust caught in the wet scan. I didn’t realize how much was there. Compressed air and lint-free tissues are now in hand for future scans. An anti-static brush is on my B&H wish list.

This following image is the same view zoomed to 100%. This shows without question, the wet scan on the right more detailed and has greater dynamic range.

The differences were so dramatic that I questioned if the focus points were the same. The default focus point is middle negative. The following image compares both at approximately middle image. At this 100% view the differences are subtle, but present. Again, notice the richer darks on the right and greater overall range. What is muddy gray on the left is a stronger gray tone on the right. The grain structure from the window (upper right) is simpler and smoother when comparing the two scans.

This final image is found on the left middle of the image and offers yet another point of comparison. It shows the bricks and window frame of an apartment. Again, notice the overall dynamic range, but more importantly, review the detail seen in the brick.

If you caught me a couple of weeks ago, I would have told you that wet scanning might be a gimmick. I wasn’t convinced from what I could find and while the 9000 ED is a great scanner it isn’t a drum scanner, so I didn’t presume the comparison in process was transferable. At the very least, it can be said, that for black and white negatives, wet scanning is a must. The quality is apparent with almost no detailed review. The effort added to the overall workflow is relatively small and the cost is nominal when compared to all the other things photo geeks spend money on.

Finally, this is the image after being imported into Adobe Photoshop Lightroom. I adjusted the crop slightly to align the horizon (noticeable at the top). Basic treatment includes conversion to grayscale, Recovery set to 12 and Clarity to 80. Tone curve is set to the Medium Contrast setting. No additional sharpening was applied. A slight vignette is added at an Amount of -15. I then edited a copy in Adobe Photoshop to review and remove a few dozen dust threads and two air bubbles at 100%. While I was there I removed the distracting light in the lower right. I am not sure I would say I am done, but my intent was to show a “clean” version of the image for review. The JPEG export was done at 100% quality, sRGB, 75ppi and 2000 pixels on its largest edge. The version below is a reduced size, remember to view the full sized version by clicking the image.

Courtyard at dusk, Park Slope, Brooklyn, New York

Pick up a copy of Sascha Steinhoff’s Scanning Negatives and Slides. While it is pretty basic, I did learn a few elements that would take far more time to learn.  Chapters 9-11 review Nikon Scan, VueScan and Silverfast in detail and should offer enough information to make a decision.

My take on it is simple.

1. If most of your work is on slides, you should buy SilverFast because it supports calibration targets so it fits into your color managed workflow. I know VueScan has the ability to work with similar targets, but this would be one more feature making the cost of the software more justifiable. Almost all of the SilverFast capabilities make scanning easier. If you are working mostly with negatives consider other options.
2. If you purchase a Nikon scanner it will come with Nikon Scan. You do not need to buy anything additional as long as you have digital darkroom tools such as Adobe Photoshop, Adobe Photoshop Lightroom, Nikon Capture NX 2, Apple Aperture.
3. If you didn’t purchase a Nikon scanner and already work in the digital darkroom then buy VueScan. VueScan is relatively inexpensive and seems to offer a considerable set of features that will work with any scanner.
4. If you didn’t purchase a Nikon scanner and are wondering what “digital darkroom” means then buy SilverFast. If you want a digital darkroom then you need to buy digital imaging software. If it sounds too scary then SilverFast and is sister products will likely be highly satisfying. They are wicked expensive, so if you always wanted Lightroom and Aperture, buy VueScan and one of those. SilverFast has a few nice features and as Steinhoff says, it integrates well with their other products. Stand-alone it is a fine choice if you are archiving a large number of negatives or slides.

All the magic happens after the scan. That is at the root of the rationale used to come to these conclusions. You need to do everything you can to capture the highest quality image. This is no different than wanted great glass and a high megapixel image sensor. As with any photography you want to get it right in the camera. That said, when we scan, we are taking another picture. Features beyond the basic but critical (e.g. setting white point, black point, ICE etc) are not required (e.g. color correction), since similar or better capability is found in other products.

I spent way too much time reviewing all of the pros and cons of each of these and Steinhoff does a great job offering a point of view. Try to spend less time on this one. It boils down to what you are scanning, what scanner software came with your scanner and if you already have and know how to use digital imaging software. Do not mind all the crazy hand gestures as they pick your pocket.

Scanner research began the minute I purchased my Mamiya. I knew I could get the local mini-lab work done, but it would cost and the result would not be very high quality. To really get the benefits of shooting film, a great scanner is required.

Drum scans are expensive. I am sure the quality is great, but I can’t justify spending the money on such high quality scans if I am not also making some money with my craft. This also means buying a drum scanner is out, even if its used. First, I live in a coop apartment where a drum scanner could fit, but it would have to also serve the role of sculpture. Second, from what I could read, they are extremely expensive to repair.

Flatbed scanners seem to be an option, certainly for those that shoot larger than medium-format. I even considered the Epson Perfection v750-M Pro as a relatively affordable high-quality machine. Almost all the forum posts I read said it was great, but not as satisfying as a dedicated film scanner.

Nikon Coolscan 9000 ED is almost the only game in town for medium-format film scanning. They fetch $500 over list on Ebay, because they are hard to come by. From what I can gather, the other scanners in the Nikon line are well liked. Buying this model means there is the Nikon service and support available to keep the unit humming. Relatively speaking, this will be far cheaper than drum scanner service and for those that are trying to find the older Minolta scanners, it means actually having a product that is not discontinued. This scanner is almost twice the price of the Epson, but is much cheaper than the other alternatives.

If you are looking at the Nikon 9000ED then you have done a search on Ebay for used Imacon scanners. Imacon was purchased by Hasselblad a while back and are considered the best of the best. Unfortunately they cost as much as cars. Even ten year old models run over $3000 USD. I guess if money was no object then I would either have enough room for a drum scanner or a new Hasselblad scanner. Either way, today, these options are too rich for my blood.

Net: Nikon Coolscan 9000 ED is the highest quality, supported film scanner at the $2000 price point. Do not spend a lot of time debating flatbed vs. dedicated. I have seen images from the Nikon compared to the Imacon, where folks debate the differences. No one debates the Epson v750M Pro against either. It is a great scanner – I believe that – but it is not a fair comparison.

As a teenager I would run around with my black Olympus OM-2n wishing that one day I would find myself with a Mamiya. It was what I saw in magazines and my medium-format camera experience went from a Yashicamat TLR to a Rolliflex TLR – a story all of its own. I had nice equipment, so the Mamiya was not an obsession, more of a dream. I love Lamborghini cars and one day I will have one. For now, it is a dream.

My first few shots with the RZ were using the Polaroid back. Polaroid had announced earlier in the year that it would stop manufacturing instant film, which was fine, I loved the results from Fujifilm even better. In the first weeks, I ran through a few packs of expired Polacolor and started to realize two very important things. First, I needed a better tripod. The Mamiya RZ is heavy and my little tripod was not up for the task. Second, I needed a light meter. Using the digital camera to do meter readings was cumbersome at best and I was still often left compensating for the film characteristics. I knew I needed these things, but I waited to make sure.

Lesson: If you can afford it, do not wait, just get what you need. It moves the conversation away from the gear and into the art of making images. The catch is in knowing what you need.

This is how it all began. The dream unleashed the sleeping giant which has compelled me to share my journey on the hybrid photography jet-stream. I know I am not alone, and yet we are scattered in our sharing.